Insulation estimating app
Insulation, air sealing, fire and sound in one bid
Add each attic, wall, floor or rim area with the R-value you're after, plus the air sealing, firestopping and sound walls. BidRidge works out the bags, batts, board feet and boards, and prices the labor from your rates.
Free for 14 days, no card needed · then $49.99/mo or $599 once · Works on Android, iPhone and iPad, Windows, Mac, Linux and any browser
What it prices
- Blown cellulose and fiberglass, dense-pack walls, fiberglass and mineral wool batts, open- and closed-cell spray foam, and rigid board (EPS, XPS, polyiso, mineral wool)
- R-value targets by assembly, with the bags, board feet and boards figured from the R per inch
- Air sealing by the item: plates, penetrations, chases, flues, can lights, duct boots, attic hatches and knee walls, with blower-door tests
- Eave baffles and vent chutes, vapor retarder, an ignition barrier on exposed foam, and removing old insulation
Every number comes from your own wages, production rates, material prices, overhead and margin. Pick your state and city in setup and BidRidge loads regional starting rates while you enter yours.
Draw it first: the Rough Carpentry Designer frames a new building or addition and sends back the wall, attic, floor and rim areas net of openings at the code R-values, the plates and rough openings to air seal, and the rated walls. Tap Design it on the job.

Firestopping and sound
- Firestop systems for metal and plastic pipes, cable bundles, joints and head-of-wall, with putty pads, collars and the documentation
- Intumescent paint on structural steel, by the coat and the dry film thickness
- Sound walls and floors: acoustic batts, sound membrane, isolation clips and hat channel, resilient channel, damping compound and acoustical sealant
- Spray foam priced as a sub, or with your own rig and spray days
Selling it
- Good, Better and Best for products, sealants and warranty
- A Selections list for the insulation and products the customer approves
- Checks for code R-values, baffles, vapor retarders, exposed foam, firestop listings, sound targets and blower-door tests
Questions
Where do the R-values come from?
Settings → Code tables sets them for the company from the IRC energy table for your code edition and climate zone: attic floor, vaulted ceiling, wall cavity, continuous insulation, floors, rim joists and basement walls. A value you type in the Insulation settings yourself stays. They're defaults to verify with your building department and your energy code, and each area can take its own target.
Can I price spray foam as a sub?
Yes. Spray foam is priced as a sub by the board foot to start. If you own a rig, switch it on in Settings and the foam is priced in sets and spray days instead.
Does it include blower-door tests?
Yes. Answer the job question with none, a final test, or a test before and after, and each test is priced. A check flags air sealing that isn't proved with a test.
More from BidRidge
Try it free for 14 days
No card needed. Then $49.99 a month or $599 once, for up to 5 phones and computers. Your jobs stay yours.
Who built this
Built by a working contractor
BidRidge started as a working contractor's own estimating workbooks. The rates, production numbers and paperwork in it come from bidding real jobs.