Carpentry estimating app
Rough and finish carpentry, bid line by line
Rough carpentry is priced by area and finish carpentry by room, each with about 40 specialty items, so a remodel bid covers the beam, the shoring and the last piece of shoe.
Free for 14 days, no card needed · then $49.99/mo or $599 once · Works on Android, iPhone and iPad, Windows, Mac, Linux and any browser
Rough carpentry
- Demolition and haul-off: walls, drywall, plaster, floors, subfloor, siding, decks, insulation, windows and cabinets
- Footings, stem walls, slabs, piers, slab cuts and patches, trenching and block
- Exterior and interior walls, headers, LVL beams, removing a bearing wall with shoring, new openings and sistering
- Sheathing and wrap, batt, blown and spray-foam insulation, and new windows and exterior doors
Every number comes from your own wages, production rates, material prices, overhead and margin. Pick your state and city in setup and BidRidge loads regional starting rates while you enter yours.
Draw it first: the Finish Carpentry Designer lays out the trim, wall treatments and stairs with the miter and bevel for every joint; the Cabinet Designer lays out the cabinets, with client, shop and commercial submittal sets; the Rough Carpentry Designer frames a shed, garage, addition or ADU stud by stud from the code tables you pick and sends the insulation too, and on a Commercial project frames steel stud partitions room by room, with the buy list and cut list, for Rough carpentry, Drywall and Insulation. Tap Design it on the job.
Construction details: the Rough Carpentry Designer prints a fastening and anchoring sheet: anchor bolts and hold-downs, each header with its king and jack studs, top plate splices, rafters at the plate with the birdsmouth, the ridge, truss bearing and sheathing nailing. Typical details from this job's numbers, not engineered: verify them with your building department and the maker's instructions.
Also in BidRidge: countertops, insulation and air sealing and window and door replacement, each priced as its own trade.

Finish carpentry
- Base, shoe, casing, crown and chair rail per room
- Prehung, slab, bypass, pocket, barn and French doors
- Wainscot, board and batten, shiplap, slat walls and coffered or plank ceilings
- Base, wall and tall cabinets, vanities, countertops, built-ins, closets, mantels, stairs and railings
Factors and checks
- Access, existing conditions, season and work height for rough work; condition, paint or stain grade and occupancy for finish work
- Payment milestones named for the work in the job (demo and concrete, framing inspection, insulation)
- A walk-through checklist that only includes the work you sold
Questions
Does it price removing a bearing wall?
Yes. Add the wall removal, temporary shoring and the LVL or beam by the linear foot, plus an engineer if needed, and it's priced with your labor rates and equipment.
Can I bid cabinets and countertops?
Yes. Base, wall and tall cabinets, vanities, laminate, butcher block and stone countertops are finish-carpentry items, install-only or with materials.
Is a small carpentry job priced fairly?
Yes. Carpentry is priced by the work lines, so 4 feet of wall or one set of cabinets prices correctly even with no floor area.
Can I draw the trim or the framing first?
Yes. Design it on a Finish carpentry job lists the Finish Carpentry Designer and the Cabinet Designer; each updates only its own rooms. On a Rough carpentry job it opens the Rough Carpentry Designer, which sends the framing and the insulation as two scopes on one project.
More from BidRidge
Try it free for 14 days
No card needed. Then $49.99 a month or $599 once, for up to 5 phones and computers. Your jobs stay yours.
Who built this
Built by a working contractor
BidRidge started as a working contractor's own estimating workbooks. The rates, production numbers and paperwork in it come from bidding real jobs.