Drywall estimating app
Drywall bids that count every sheet and every coat
Measure each room and BidRidge figures the wall and ceiling board, sheets with waste, corner bead, mud and tape, then prices hanging and finishing to the level you sell.
Free for 14 days, no card needed · then $49.99/mo or $599 once · Works on Android, iPhone and iPad, Windows, Mac, Linux and any browser
What it prices
- Walls and ceilings per room, with 18 square feet taken off for each door or window
- Finish levels 0 to 5 (GA-214): fire-taped, garage, standard smooth and skim coat each change the finishing hours and materials
- Orange peel or knockdown texture, outside corners and bead, moisture-resistant board for baths and laundry
- Demolition of existing drywall, small patches, and priming the new board
Every number comes from your own wages, production rates, material prices, overhead and margin. Pick your state and city in setup and BidRidge loads regional starting rates while you enter yours.
Draw it first: the Rough Carpentry Designer frames steel stud partitions on a Commercial project and sends the board by partition type to this quote, with the framing and the insulation as their own scopes. Tap Design it on a Rough carpentry job.
Also in BidRidge: ceilings, priced as its own trade.

Specialty work
- Work height multipliers for 10, 12 and 14-16 ft walls, scaffold and lifts
- Type X fire-rated board, second layers, fire-taping, acoustic sealant, resilient channel and sound board
- Popcorn removal, smoothing texture, skim coats and texture matching
- Bullnose corners, arches, soffits, window returns, access panels and furring
Job Pack and proposal
- Shopping list: sheets by type, screws, joint compound scaled to the finish level, setting compound, tape, bead and primer
- A phase schedule with dry times between coats
- Good, Better and Best with board and bead upgrades, and the finish level written into the terms
Questions
How many sheets of drywall do I need?
Add the wall area (perimeter × height, less about 18 square feet per door or window) and the ceiling area, add 10% for waste, and divide by 32 for 4×8 sheets. The free drywall calculator on this site does it for you, and BidRidge does it per room in every estimate.
Does it price different finish levels?
Yes. Levels 0 through 5 each have their own labor and material multipliers that you can change, so a Level 5 skim costs more than a Level 4 finish and the proposal says which level is included.
Can it handle high ceilings and stairwells?
Yes. Set the work height per room (to 9 ft, 10 ft, 12 ft, 14-16 ft or over 16 ft) and add scaffold or lift days. Hanging and finishing hours go up by your multipliers.
More from BidRidge
Try it free for 14 days
No card needed. Then $49.99 a month or $599 once, for up to 5 phones and computers. Your jobs stay yours.
Who built this
Built by a working contractor
BidRidge started as a working contractor's own estimating workbooks. The rates, production numbers and paperwork in it come from bidding real jobs.