BidRidge · design tools

Designers

Lay out the job, check it against the trade standard, print a drawing set and send the quantities to a BidRidge quote. Drawing is free for anyone and saves in this browser. Saving the drawing set, the lists and the shop files, and sending a design to a quote, come with every BidRidge license, and with the 14-day free trial.

Tile Designer Floors, walls, showers and patios in 22 patterns.
  • Cut lists and full-size templates
  • TCNA EJ171 movement joints
  • Architectural PDF set
/designer/tile
Flooring Designer LVP, VCT, LVT, carpet, carpet tile, wood, laminate and sheet goods, residential or commercial.
  • Product to order, seams and heat weld
  • Flash cove, base, floor prep and stairs
  • Transitions picked from the floor heights
/designer/flooring
Roofing & Siding Designer Shingle and metal roofs, siding, EIFS, soffit, fascia and gutters from one house model; commercial claddings and standing seam roofs.
  • Squares, edges and the ice barrier by plane
  • Metal panel layout and cut list by profile
  • Flashing schedule: profile, metal and gauge at every transition
/designer/roofing
Concrete Designer Slabs, drives, walks, footings, walls and steps, with the rebar and the pours; commercial slabs, foundations and formwork.
  • Joint layout, grades and pours
  • Rebar bar list by mark and pound
  • Ready-mix order, frost footings, radiant slabs
/designer/concrete
Deck & Fence Designer Composite and PVC decks with borders, inlays and curves; fences and gates, and commercial fencing.
  • Framing worked out under every pattern
  • IRC R507 joists, beams and footings
  • Cut list by color and stock length
/designer/decks
Room Designer Kitchens and bathrooms laid out in minutes: drag the fixtures and cabinets along the walls, the clearances check as you go.
  • Toilet, lavatory, tub and shower clearances and shower size checked
  • Plan and every wall's elevation, one drawing sheet
  • Tile, floor, paint, cabinet LF and plumbing moves sent to the quote
/designer/room
Metal Stud & Drywall Designer Commercial partitions by type from the schedule: steel studs, deflection heads, soffits of any shape, shaft and exterior steel walls, and the board.
  • Partition types checked against the SFIA height tables and UL designs
  • Soffits any shape, stepped or curved; shaft walls; exterior walls with the wind
  • Framing, drywall and insulation lines sent to the quote
/designer/drywall
Cabinet Designer Frameless 32 mm cabinets and built-ins, to AWI grades.
  • Cut lists and sheet layouts
  • Plan, elevations and sections
  • CNC files (DXF or G-code) and part labels
/designer/cabinets
Hardscape & Landscape Designer Paver patios, walks, drives, block walls and planting.
  • Paver layouts with cut counts
  • Base, wall and drainage quantities
  • Site plan, wall elevations, sections
/designer/landscape
Ceiling Designer ACT grids, drywall on grid or black iron, wood, linear panels, clouds and baffles, at any height.
  • Balanced grids, cut tiles and seismic bracing
  • Boards nested into stock lengths on a vault
  • Batch edit and saved settings across ceilings
/designer/ceilings
Countertop Designer Kitchens, islands, waterfalls, sills and vanities on your slab sizes, with CNC files by machine.
  • Pieces nested on slabs with the yield
  • Seams off the sink and dishwasher
  • Shop steps, router bits and CNC export
/designer/countertops
Finish Carpentry Designer Base, casing, crown, wainscot, board and batten and stair trim, room by room and wall by wall; commercial doors and interior finishes.
  • Trim packages, overrides per room and wall
  • Battens and panels kept off outlets
  • Stair skirts and every miter and bevel
/designer/trim
Rough Carpentry Designer Sheds, garages, additions and ADUs framed stud by stud, from the floor joists to the rafters or trusses.
  • Headers and spans from the code tables you pick
  • Rafter cuts, birdsmouth and every wall elevation
  • Sheathing and lumber nested, insulation sent too
/designer/framing
Division 10 Designer Commercial Toilet compartments, showers and accessories, checked against the codes you turn on.
  • Accessible and ambulatory compartments, grab bars, clear spaces
  • Mounting elevations wall by wall
  • Blocking plan for the GC, schedules and buy list
  • Submittal set for the architect
/designer/div10
Glazing Designer Commercial Storefront, entrances, curtain wall, windows and doors on elevations, checked as you draw.
  • Openings gridded into lites, doors and hardware sets
  • Safety glazing, wind zones and mullion deflection checks
  • Glass order list, cut list and generic sections
  • Submittal set for the architect
/designer/glazing
Masonry Designer Brick, block and stone walls drawn on elevations, coursed, counted and checked. Commercial mode with the Commercial tier.
  • Units, mortar, grout, rebar and ties by the wall, priced per sf or itemized
  • Lintels, flashing, weeps and movement joints checked
  • Coursed elevations, plan, reinforcing and details
  • Submittal set for the architect (Commercial)
/designer/masonry
Low-Slope Roofing Designer Commercial Commercial low-slope roofs: tapered insulation to the drains, membranes and the sheet metal, checked as you draw.
  • Tapered layout with panel marks, saddles and crickets
  • TPO, PVC, EPDM, mod bit, built-up and coatings by wind zone
  • Slope, drainage, overflow, edge metal and R-value checks
  • Details, schedules and a Submittal set
/designer/lowslope

Using the BidRidge app? Tap Design it on a tile, flooring, roofing, siding, EIFS, concrete, ceiling, countertop, carpentry, insulation, landscape or deck job and the designer opens signed in. Need an estimate instead? Open BidRidge.

Layout and estimating tools, not engineered designs: the contractor checks dimensions in the field and confirms local code, permit and manufacturer requirements. Brand names are trademarks of their owners; BidRidge isn't affiliated with or endorsed by them.