Base · casing · crown · wainscot · board & batten · stairs

Finish Carpentry Designer

Selected

Checks

    What the checks look at

    Rooms: openings on their walls and clear of each other, casings that fit before the corner, chair rails that run into window trim, a picture rail clear of the crown, runs longer than the longest stock (scarfs). Walls: battens and stiles kept off outlets and switches, treatments cut around windows, a thin top course of shiplap. Stairs: risers at most 7 3/4″ and treads at least 10″ (IRC R311.7.5), a skirt board wide enough for its notches, settings past what the saw reaches, and raked-to-level corners where the profiles can't match exactly. Code figures are defaults to verify with your building department; set them in Rules. The saw settings are worked out from the geometry: verify with a test cut.

    Rooms

    Every room with its package, trim LF, openings and wall treatments

    Corners & saw settings

    Every corner and joint with its miter and bevel

    Cut list

    Every piece with its ends, nested into the stock lengths in Rules

    Buy list

    Material only, at your prices
    Sticks from the nesting, plus the Rules spare; prices from Products & prices.

    Send to BidRidge

    Makes a Finish carpentry template: one row per room with its base, shoe, crown, chair rail and picture rail LF, the doors, closets and windows to case, and the wall treatments (panel wainscot, board and batten with its battens, shiplap, beadboard, grids, picture-frame boxes, plinth blocks); one row per stair with its skirt, raked trim, raked panels, joints, rail and balusters; plus the job answers and a note. BidRidge prices the labor and materials at your rates.

    Drawing set

    Vector PDF with a title block, at standard scales

    Save & export

    The project also saves in this browser as you work.