Veneer ties: area per tie and spacing against the TMS 402-22 prescriptive limits (basic 2.67 sq ft and 24 in., enhanced 1.78 sq ft and 16 in., as BIA TN 3C summarizes them), the zone 5 strips at outside corners, corrugated ties on wood only; anchored stone per IBC 1404.7. Air space 1 in. min, the cavity 4 or 6 in. max. Veneer height on wood framing (30 ft, 38 ft at a gable). Flashing and weeps at every base, head, sill and shelf angle, the base within 10 in. of grade (1404.4.2), weeps under 33 in. o.c.; adhered veneer clearances and mortar (1404.10.1.3, 2103.2.4). Movement joints: CMU control joints at 25 ft and 1.5 x the height (NCMA TEK 10-2C), brick expansion joints at 25 ft, 20 ft with openings, near corners, 15 ft through parapets (BIA TN 18A). Lintel bearing and the IRC veneer lintel table. Sills and heads on course. Reinforcing counted as drawn. Cold and hot weather per TMS 602 (BIA TN 1). Checks and flags, not an engineered design or a plan review: the engineer, the building department and the project documents govern.
Makes a Masonry template: every line of the buy list with its quantity, your price and its install hours, in the pricing way picked above. The quote shows the same material dollars; the hours price at the job's wage basis (on a commercial job, commercial wages and its project management, submittal and bond lines).
One row a product the design uses, under its spec section. Generic products: type the product and manufacturer the specification calls for; the sections are marked "verify against your project manual".
The project also saves in this browser as you work. Import takes a Roofing & Siding Designer commercial project file (.roofing.json: its walls with their storefronts, doors, windows and louvers) or a Glazing Designer project file (.glazing.json: its exterior elevations become walls, its openings masonry openings with lintels). The walls come in in the system picked under Wall (or the first system).