Paver rules are from CMHA Tech Bulletin PAV-TEC-002 (Construction of Interlocking Concrete Pavements): at least 4″ of compacted base for walks and patios and 6″ for residential drives over well-drained soil, more in cold climates or wet, weak soils; 1″ bedding sand; 1/16″ to 3/16″ joints; at least 1.5% slope. Wall rules are from segmental block installation guides: bury 6″ or 10% of the height, a 6″ compacted leveling pad, a 12″ drain-stone zone and a 4″ perforated pipe. Unreinforced height limits depend on the block, so follow the maker's chart. Walls holding back over 4′ of soil, over 2′ with a surcharge (drive, patio, building or slope above), or tiered closer than twice the lower wall’s height need an engineered design (IRC R404.4); walls over 4′ from the bottom of the footing need a permit (IRC R105.2). Guards where a walking surface is over 30″ above the grade within 36″ (IRC R312.1); handrails on 4 or more risers (IRC R311.7.8); driveways in 80 mm pavers laid in herringbone (ICPI Tech Spec 4). Code figures are defaults to verify with your building department and local amendments.
Makes a Hardscape & Landscape template: every patio, walk and drive with its base, dig depth and edge restraint, every wall with its length, heights, geogrid and drain stone, every bed and lawn with topsoil, mulch and edging, plus plant, step and drain counts. The client and site address (Project and Drawing set), a notes line and a Selections list (pavers, pattern, wall block, caps, mulch, plants) come along. BidRidge prices the labor and materials at your rates.
Open in BidRidge hands the template to the BidRidge web app in this browser (bid-ridge.com/app) and opens its Templates screen. For the Android app, use Save BidRidge template and import the file.
The project also saves in this browser as you work.