Each straight run of boxes is one top: the boxes plus the front overhang, the end overhang where a side is open, a splash on every edge along a wall, the sink, faucet holes and cooktop where they were. At a corner the run that goes through keeps the corner. Change a top's edges or seams in Tops (the page asks before the cabinets change it again). Tops you drew in Tops stay as they are.
Measure on top of the boxes, from a back corner to the opposite front corner, both ways. Equal diagonals: the run is square. Different: it is out of square by about the difference over the depth, so template it or scribe it before cutting.
Reads lines, arcs, circles, polylines (with their curves), splines and blocks; every corner and curve is kept. Outlines inside a top are its sink, cooktop and faucet holes. Layer names say what each line is: check them once per templater brand (in this browser, like the CNC tool numbers). Brand names are trademarks of their owners; BidRidge isn't affiliated with or endorsed by them.
Shoot it straight on: stand over the template with the phone level and square to it, the whole template in the frame and a tape along its longest edge. A photo taken at an angle makes the far end short. Then set the scale from that tape and check it on another length before you trace.
Seams stay clear of cutouts and off the dishwasher; overhangs past the unsupported limit get brackets; inside corners in solid surface are radiused; waterfall legs are cut next to the top so the vein carries over; accessible tops at 34″ (36″ at a service counter) with knee space. Code figures are defaults to verify with your building department; set them in Rules from the project and the makers' instructions.
Makes a Countertops template: one row per top (runs, islands and peninsulas; window sills; vanities and other tops) with the material, size, finished edge and profile, splash, sinks, cooktops and holes, seams, waterfalls and miters, brackets, and the slabs or sheets from the nesting. BidRidge prices fabrication and install at your rates.
Open in BidRidge hands the template to the BidRidge web app in this browser (bid-ridge.com/app) and opens its Templates screen. For the Android app, use Save BidRidge template and import the file.
One row per finish code on the Submittal set's PRODUCT DATA AND SAMPLES log. Blank fields print what the finish definition and the material give.
The architect's sheet and detail for each view: "REF: 3/A-501" prints under its title. Blank prints nothing.
A revision clouds what changes after it (Cloud on sheets) and goes in the title block.
The project also saves in this browser as you work.